Skip to content

Tecno Spark 10 Pro Specifications, features and Review

Tecno Spark 10 Pro

Tecno Spark 10 Pro Review

Design
4 / 5
4
Display
3 / 5
3
Camera
3 / 5
3
Performance
3 / 5
3
Features
3 / 5
3
Connectivity
3 / 5
3
Battery
4 / 5
4
3
Tecno Spark 10 Pro Specifications, features, and Review in detail. Tecno Spark 10 Pro was announced on 6th March 2023 and is introduced with some of the main highlighted specs, including a 6.8 inches FHD+ display, 8GB RAM, 256GB Storage, 50MP+unspecified Rear camera, 32MP front camera, Mediatek Helio G88 SoC and 5000 mAh battery. Without wasting much time let’s dive into Tecno Spark 10 Pro specifications, all the Mobile specifications are based on Design, Display, Camera, OS, and battery.

Tecno Spark 10 Pro Specifications

Display

Tecno Spark 10 Pro sports a 6.8-inch FHD+, IPS LCD touchscreen display with 1080 x 2460 pixels resolution and 395 PPI density. The phone comes with a dimension of 168.4 x 76.2 x 8.4 mm (Height x Width x Thickness) and it weighs 208 grams.

Camera

Regarding Optics, Tecno Spark 10 Pro comes with a triple camera setup at the back consisting of a 50MP wide-angle primary sensor with f/1.6 aperture, and PDAF. The secondary and tertiary cameras are unspecified. The rear camera holds features like Dual-LED flash, HDR, and panorama. It can record [email protected] The device is packed with a 32MP camera sensor on the front side for nice quality selfies.

RAM and Internal Storage

Tecno Spark 10 Pro has an Octa-core processor paired with Mediatek Helio G88 SoC and Mali-G52 MC2 GPU. The phone also comes with an 8GB of RAM option while it offers 128GB and 256GB of onboard storage memory. The phone storage can be further expanded.

OS and Battery

Tecno Spark 10 Pro comes with HIOS 12.6 based on the Android 13 operating system. The phone drives the energy from a 5000 mAh battery that supports 18W wired fast battery charging.

Connectivity and Sensors

Tecno Spark 10 Pro includes connectivity options like Wi-Fi 802.11 a/b/g/n/ac, dual-band, Bluetooth 5.0, A2DP, LE, and USB Type-C port. The main sensors on this phone include Fingerprint (side-mounted), accelerometer, proximity, and compass. Tecno Spark 10 Pro comes in Starry Black, and Pearl White color options.

Tecno Spark 10 Pro Specifications table

Body Dimension 168.4 x 76.2 x 8.4 mm (6.63 x 3.00 x 0.33 in)
Weight 208 grams
SIM Dual SIM
Display Type IPS LCD
Display Size 6.8 inches
Display Resolution 1080 x 2460 pixels
PPI Density 395 PPI density
Protection
OS Android 13
Chipset Mediatek Helio G88
CPU Octa-core (2×2.0 GHz Cortex-A75 & 6×1.8 GHz Cortex-A55)
GPU Mali-G52 MC2
Memory Card Slot Yes
RAM 8GB
Internal Storage 128GB, 256GB
Rear Camera 50 MP, f/1.6, (wide), PDAF + Unspecified cameras
Video Recording 1080p at 30fps
Front Camera 32 MP, (wide)
Video Recording 1080p at 30fps
3.5mm Audio Jack Yes
Bluetooth 5.0, A2DP, LE
WLAN Wi-Fi 802.11 a/b/g/n/ac, dual-band
NFC Yes
Infrared Port No
USB USB Type-C 2.0, OTG
GPS GPS, GLONASS, GALILEO, BDS
Sensors Fingerprint (side-mounted), accelerometer, proximity, compass
Battery Li-Po 5000 mAh
Charging 18W wired
Disclaimer We can not guarantee that the information on this page is 100% correct

Tecno Spark 10 Pro Special Features

  1. Triple Camera Set-up
  2. 18W Wired Fast Charging
  3. NFC
  4. 90Hz display refresh rate
  5. IPS LCD Display
  6. Side-mounted fingerprint scanner
  7. Dedicated memory card slot
  8. Glass back design
So Guy’s this was our blog on Tecno Spark 10 Pro Specifications and it’s main features. If you have any suggestions or queries please write in the comments down below.

Leave a Reply

Your email address will not be published. Required fields are marked *